Enable UBX-SEC-UNIQID for logging

[PaulZC]

Based on this forum discussion:

https://forum.sparkfun.com/viewtopic.php?p=241438#p241438

[PaulZC]

Can't see a configuration key for it though. May have to poll it directly? And/or add it to the u-blox library?

[nseidle]

Ya, it's not really a message or a configurable value, so I suspect it will have to be a helper function in the lib similar to the MON-VER firmware report.

[PaulZC]

OK. This is now in the u-blox library:

https://github.com/sparkfun/SparkFun_u-blox_GNSS_v3/releases/tag/v3.0.14

[PaulZC]

Shall I do a GNTXT message for it?

[nseidle]

Yes please. Also, consider display it on the system menu.

[PaulZC]

OK. This is done. The bulk of the changes are in here: 52fca37

The unique chip ID will pop up on the system menu, the settings file, the WiFi configuration page, and also gets added to the log file as GNTXT: 01,01,11 is the GNSS unique chip ID. GNTXT,01,01,07 is the last four digits of the ESP32 MAC Address. Those two together will uniquely identify the RTK unit.

UBX Integrity Checker

Could this file contain any NMEA messages? (Y/n):
Could this file contain any RTCM messages? (Y/n):
Do you want to repair the file? (y/N):
Do you want to print any GNTXT messages found? (y/N): y

Processing e:SFE_Reference_Station_230529_114041.ubx

NMEA $ found at byte 0

$GNTXT,01,01,00,ESP_RST_POWERON*1C

$GNTXT,01,01,03,v99.99-May 29 2023*7A

$GNTXT,01,01,04,HPG 1.32*34

$GNTXT,01,01,11,E74032F95D*28

$GNTXT,01,01,07,6CB2*53

$GNTXT,01,01,09,230529,114041*7A

$GNTXT,01,01,08,0,0,0,*45


Processed 74714 bytes
File size was 74714
Longest valid UBX message was 0 bytes
Longest valid NMEA message was 78 characters
Longest valid RTCM message was 0 bytes
Message types and totals were:
Message type: GNTXT      Total: 7
Message type: GNGST      Total: 158
Message type: GNRMC      Total: 158
Message type: GNGGA      Total: 158
Message type: GNGSA      Total: 790
Message type: GPGSV      Total: 78
Message type: GLGSV      Total: 41
Message type: GAGSV      Total: 39
Message type: GBGSV      Total: 39
Message type: GQGSV      Total: 39


Bye!

[nseidle]

This has been implemented in firmware release v3.4.