Inav 8.0 - 8.0.1 Kakute F4 V2

[JoachimF]

Hello,

After upgraded from 6.1 to 7.1.2 without issue, the upgrade to 8.0.1 doesn't work at all.

Tested with diff in cli (with the tool to convert 7 to 8) and manually configure the FC

Only internals sensors are working.

External :
Baro BMP280 not detected
GPS Neo-6M not detected
Battery voltage always 0V

I didn't try the receiver.

As everything is fine with 6.1 and 7.1.2, I think the bin is not for the this FC, like it was with INAV 3.0.

Thanks for your help.

Joachim

[sensei-hacker]

NEO6M support was removed last year, in INAV 8.

Other than that, please flash with erase and test hardware detection without loading a diff.

[JoachimF]

As I write, it is already done.

NEo6m is ublox protocol, how it could be removed? Anyway, it doesn't explain why the baro and the voltage monitor are not working.

[sensei-hacker]

The 6M was a legacy UBLOX protocol that was deprecated in 2012, when the NEO7M came out.

You won't regret it if you upgrade to an M9 - Ublox has made significant improvements in the last 15 years.