A Nerves poncho project to control lights on a GrovePi relay switch using Phoenix channels.

On the GrovePi+ or GrovePi Zero, connect a relay switch to port D3. The relay switch should be connected to the light power cord.

To start this Nerves app:

• cd lights_firmware Build firmware from this directory.
• export MIX_TARGET=my_target or prefix every command with MIX_TARGET=my_target. For example, MIX_TARGET=rpi3
• export NERVES_NETWORK_SSID=my_wifi WiFi Network
• export NERVES_NETWORK_PSK=secret WiFi Password
• export NERVES_HOST="192.168.0.000" Host needed for channels handshake.
• Install dependencies with mix deps.get
• Create firmware with mix firmware
• Burn to an SD card with mix firmware.burn

• Official docs: https://hexdocs.pm/nerves/getting-started.html
• Official website: http://www.nerves-project.org/
• Discussion Slack elixir-lang #nerves (Invite)
• Source: https://github.com/nerves-project/nerves