MW PSU Mount Distribution Block

printer_mods/RikersBeard/Mean_Well_PSUs_Side_Mount_5V_Distribution_Block/.metadata.yml

@@ -0,0 +1,36 @@
+---
+# The title of your mod. Choose a short and descriptive name
+title: Mean Well PSU Side Mount 5V Distribution Block
+# A short description of your mod. Try to describe your mod with 1-2 short sentences
+description: Uses 2x WAGO 221-415 to create 5VDC +/- distribution blocks that mount to the side of Mean Well PSUs such as LRS/RSP series, instead of crowding the single +/- terminals on your 5V PSU.
+# Mod version: Set this to 1 when you are submitting a new mod. When you make changes to your mod, you may increment this number
+mod_version: 1
+# You may add your discord username here so people can contact you about your mod
+discord_username: rikersb3ard
+# The CAD files for your mod. Please provide them as a list.
+# Note that each mod must include at least one CAD file.
+cad:
+- CAD/LRS_Side_Mount_5V_Distribution_Block.step
+# The image files provided with your mod. These may be instructions you use in your README.md file, or other additional pictures.
+# **Note that the first image specified here will be used as cover image on mods.vorondesign.com**
+# All paths are relative to this .metadata.yml file.
+images:
+- Images/Test_print_2.jpg
+- Images/Test_print_1.jpg
+- Images/Mounting_Location.png
+- Images/flush.png
+- Images/Standard_Voron_Print_Settings.png
+# List all STL files
+stl:
+- STL/LRS_Side_Mount_5V_Distribution_Block.stl
+# Printer compatibility. Please specify all compatible printers as a list. The following values are accepted:
+# "V0", "V0.1", "V0.2", "V0.2r1", "V1", "V1.6", "V1.8", "V1.8r1",  "V2", "V2.1", "V2.2", "V2.4", "V2.4r1", "V2.4r2", "VSW", "VT", "VTr1", "VL"
+# Please only specify printers that you have either tested your mod on yourself, or that someone else has tested for you. If you are unsure whether your
+# mod is compatible with a certain printer, don't list it here!
+printer_compatibility:
+- V0
+- V1.8
+- VT
+- V2.4r2
+- VL
+- VSW