Use Skipper to build & test your project in an isolated environment, using Docker containers with pre-defined sane configuration. Skipper allows you to execute makefile targets inside a container (or just run arbitrary commands). You can also use Skipper to build your development and production containers.

It is recommended to install Skipper directly from PyPi:

sudo pip install strato-skipper

You can also install Skipper from source:

git clone http://github.com/Stratoscale/skipper
sudo make install

Configure bash completion for skipper by sourcing the completion script in your ~/.bashrc file:

echo 'source <(skipper completion)' >>~/.bashrc

Skipper supports building and running in Python3 environment Set your locale to UTF-8:

export LC_ALL="en_US.UTF-8"
export LANG="en_US.UTF-8"

If you are running Skipper on Linux without sudo, Skipper will create a dedicated user inside the build container with both root and docker groups. All commands will be executed on behalf of this user.

To preserve the environment, Skipper uses the su command with the -m flag. However, on Debian distros, the PATH variable may be reset even with the -m flag specified. To work around this issue, Skipper provides an alternative option using sudo -sE.

To use sudo -sE as an alternative:

1. Install sudo in the build container.
2. Disable env_reset with secure_path in the /etc/sudoers defaults.
3. Set the SKIPPER_USE_SUDO environment variable to "true".

export SKIPPER_USE_SUDO="true"

# skipper.yaml

env:
    SKIPPER_USE_SUDO: "true"

Note: This information is crucial for a seamless experience when using Skipper with Docker on Linux.

Skipper can serve as your primary tool for your daily development tasks:

• Use skipper build to build the images defined by the Dockerfiles in your repository. All the images will be automatically tagged with the COMMIT_ID.
• Use skipper push to publish your images.
• Use skipper images to list your images.
• Use skipper rmi to delete your images.
• Use skipper make to execute makefile targets inside a container.
• Use skipper run to run arbitrary commands inside a container.
• Use skipper shell to get an interactive shell inside a container.

  -v, --verbose                 Increase verbosity
  --registry                    URL of the docker registry
  --build-container-image       Image to use as build container
  --build-container-tag         Tag of the build container
  --build-container-net         Network to connect the build container (default: net=host)
  --env-file                    Environment variables file/s to pass to the container
  --build-arg                   Set build-time variables for the container
  --build-context               Additional build contexts when running the build command, give them a name, and then access them inside a Dockerfile
  --help                        Show this message and exit.

Skipper allows you to add additional build contexts when running the build command, give them a name, and then access them inside a Dockerfile. The build context can be one of the following:

• Local directory – e.g. --build-context project2=../path/to/project2/src
• Git repository – e.g. --build-context qemu-src=https://github.com/qemu/qemu.git
• HTTP URL to a tarball – e.g. --build-context src=https://example.org/releases/src.tar
• Docker image – Define with a docker-image:// prefix, e.g. --build-context alpine=docker-image://alpine:3.15

On the Dockerfile side, you can reference the build context on all commands that accept the “from” parameter. Here’s how that might look:

FROM [name]
COPY --from=[name] ...
RUN --mount=from=[name] …

As a convention, skipper infers the docker images from the Dockerfiles in the top directory of your repository. For example, assuming that there are 3 Dockerfile in the top directory of the repository:

Dockerfile.service1
Dockerfile.service2
Dockerfile.development

To build the image that corresponeds to Dockerfile.service1, run:

skipper build service1

In the same way you can build the image corresponded to Dockerfile.development:

skipper build development

You can also build mutliple images with single command:

skipper build development service2

A context path can be added to the build command, The build’s context is the files at a specified location PATH, the default is current directory:

skipper buid service1 --container-context /path/to/context/dir

If no image is specifed skipper will build all detected images:

skipper build

If you don't want to store all the Dockerfiles under the top directory of the project, you can specify the project's containers in skipper's config file (see below).

Once you've built the images of your repositories as described above. You can publish them by pushing them to the registry. To push the service1 image, run:

skipper --registry some-registry push service1

Note that the registry in this command must be the same registry used while building the image.

To list local images of your repository, run:

skipper images

In order to also list also images that were pushed to the registry, run:

skipper --registry some-registry images -r

To delete an image of your repository, run:

skipper rmi service1 <tag>

In order to delete the image from the registry, run:

skipper --registry some-registry rmi -r service1 <tag>

You can execute a Makefile target inside a container. This is good for keeping the development in an isolated environment, without installing development tools on the host. Once a development container is defined and built, it can be shared among the team member, assuring all of them use exactly thg same development environment. Assuming your project has a Makefile with a tests target, you can run:

skipper --registry some-registry --build-container-image development --build-container-tag latest \
make tests

If your Makefile is not standard (i.e. Makefile.arm32) you can pass it to the make command:

skipper --registry some-registry --build-container-image development --build-container-tag latest \
make -f Makefile.arm32 tests

You can also run arbitrary commands inside your containers.

skipper --registry some-registry --build-container-image development --build-container-tag latest \
run gcc myprog.c -o myprog 

You can get a shell inside your containers.

skipper --registry some-registry --build-container-image development --build-container-tag latest \
shell

Skipper allows you to define commonly used parameters in a configuration file skipper.yaml at the top directory of your repositry.

registry: some-registry 
build-container-image: development
build-container-tag: latest
container-context: /path/to/context/dir

build-arg:
  - VAR1=value1
  - VAR2=value2

build-context:
  - context1=/path/to/context/dir # Local directory
  - qemu-src=https://github.com/qemu/qemu.git # Remote git repository
  - src=https://example.org/releases/src.tar # Remote tar file
  - alpine=docker-image://alpine:3.15 # Remote docker image

make: 
    makefile: Makefile.arm32
containers:
    service1: path/to/service1/dockerfile
    service2: path/to/service2/dockerfile
env:
    VAR: value
env_file: path/to/env_file.env

# Use the git revision as the build container tag
# Allows to use the same build container unless the git revision changes
# This is useful when using a CI system that caches the build container
# Remember to commit if you changing the build container
build-container-tag: 'git:revision'

Using the above configuration file, we now can run a simplified version of the make command described above:

skipper make tests

For shell, run & make commands:
By default, when you run skipper on a linux machine it will use the host network and no mapping required.
For macos and windows machines where the host network is unsupported or for a custom network, you can publish a port and make it available to services outside of the container using the --publish or -p flag.

skipper make -p 123:123 tests
skipper make -p 123-130:123-130 tests

For shell, run & make commands: You can use -e in order to pass environment variables to the container.

skipper make -e regex=test1 tests

Your configuration file can contain environment variables, Skipper will set the specified environment variables in the container.

env:
    VAR: value

You can add an environment variables file (or multiple files) using --env-file. This file should use the syntax =value (which sets the variable to the given value) or (which takes the value from the local environment), and # for comments. The variables defined in this file will be exported to the container. Such file can look like this:

$ cat env_file.env
# This is a comment
KEY1=value1
KEY2=value2
KEY3    

Skipper configuration file can include the environment variables file:

env_file: 
    - /path/to/env_file1.env
    - /path/to/env_file2.env

Skipper uses the variable values from the shell environment in which skipper is run. It’s possible to use environment variables in your shell to populate values For example, suppose the shell contains EXTERNAL_PORT=5000 and you supply this configuration:

env:
    EXTERNAL_PORT: $EXTERNAL_PORT

When you run Skipper command with this configuration, Skipper looks for the EXTERNAL_PORT environment variable in the shell and substitutes its value in.In this example, Skipper resolves the $EXTERNAL_PORT to "5000" and will set EXTERNAL_PORT=5000 environment in the container.

If an environment variable is not set, Skipper substitutes with an empty string.

Both $VARIABLE and ${VARIABLE} syntax are supported. Extended shell-style features, such as ${VARIABLE-default} and ${VARIABLE/foo/bar}, are not supported.

You can use a $$ (double-dollar sign) when your configuration needs a literal dollar sign. This also prevents Skipper from interpolating a value, so a $$ allows you to refer to environment variables that you don’t want processed by Skipper.

env:
    VAR: $$VAR_NOT_INTERPOLATED

Skipper supports evaluating shell commands inside its configuration file using $(command) notation. e.g.

env:
    VAR: $(expr ${MY_NUMBER:-5} + 5)
volumes:
    - $(which myprogram):/myprogram

Skipper can bind-mount a host directory into the container. you can add volumes in the configuration file:

volumes:
  - /tmp:/tmp:rw
  - ${HOME}/.netrc:/root/.netrc
  - ${HOME}/.gocache:/tmp/.gocache

Skipper default to the the project directory as the working directory for the run, make and shell commands, you can override the workdir by specifying it in the configuration file:

workdir: /path/to/workdir

Skipper default to the the project base directory (e.g. /path/to/project/../) as the workspace for the run, make and shell commands, Note that the workspace directory is mounted by default. you can override the workspace directory by specifying it in the configuration file

workdir: $PWD

Skipper sets environemnt variables to inform the user about the underline system: CONTAINER_RUNTIME_COMMAND - The container conmmand used to run the skipper container. podman/docker