Question about deauther/installation/upload.md

[11bunno11]

I have a question regarding the information on the Wiki at deauther/installation/upload.md

I have a Dstike deauther watch thingy and I want to put the firmware inside but when i try to do it using arduino, it spits this error message:

Arduino: 1.8.19 (Linux), Board: "DSTIKE Deauther, DSTIKE Deauther OLED V2, 4MB (FS:1MB OTA:~1019KB), Only Sketch, 921600"

Executable segment sizes:
IROM : 796428 - code in flash (default or ICACHE_FLASH_ATTR)
IRAM : 28764 / 32768 - code in IRAM (ICACHE_RAM_ATTR, ISRs...)
DATA : 1348 ) - initialized variables (global, static) in RAM/HEAP
RODATA : 3352 ) / 81920 - constants (global, static) in RAM/HEAP
BSS : 27448 ) - zeroed variables (global, static) in RAM/HEAP
Sketch uses 829892 bytes (79%) of program storage space. Maximum is 1044464 bytes.
Global variables use 32148 bytes (39%) of dynamic memory, leaving 49772 bytes for local variables. Maximum is 81920 bytes.
esptool.py v2.8
Serial port /dev/ttyAMA0
Connecting...
Traceback (most recent call last):
File "/home/riku/.arduino15/packages/deauther/hardware/esp8266/2.7.5/tools/upload.py", line 65, in
esptool.main(cmdline)
File "/home/riku/.arduino15/packages/deauther/hardware/esp8266/2.7.5/tools/esptool/esptool.py", line 2890, in main
esp.connect(args.before)
File "/home/riku/.arduino15/packages/deauther/hardware/esp8266/2.7.5/tools/esptool/esptool.py", line 475, in connect
last_error = self._connect_attempt(mode=mode, esp32r0_delay=False)
File "/home/riku/.arduino15/packages/deauther/hardware/esp8266/2.7.5/tools/esptool/esptool.py", line 455, in _connect_attempt
self.sync()
File "/home/riku/.arduino15/packages/deauther/hardware/esp8266/2.7.5/tools/esptool/esptool.py", line 393, in sync
self.command(self.ESP_SYNC, b'\x07\x07\x12\x20' + 32 * b'\x55',
File "/home/riku/.arduino15/packages/deauther/hardware/esp8266/2.7.5/tools/esptool/esptool.py", line 337, in command
self.write(pkt)
File "/home/riku/.arduino15/packages/deauther/hardware/esp8266/2.7.5/tools/esptool/esptool.py", line 300, in write
self._port.write(buf)
File "/home/riku/.arduino15/packages/deauther/hardware/esp8266/2.7.5/tools/pyserial/serial/serialposix.py", line 552, in write
raise writeTimeoutError
serial.serialutil.SerialTimeoutException: Write timeout
the selected serial port serial.serialutil.SerialTimeoutException: Write timeout
does not exist or your board is not connected

even though i have the watch connected it spits this error message
can anyone help me?
thanks