Native Game Controllers supported by Analogizer‐FPGA using SNAC adapters

Please read this before: Analogizer - Compatibility Device Table

PSX DUAL SHOCK (DS)/DS2:

Native Playstation Dual Shock/Dual Shock 2 game controllers. Can be used the dual analog sticks, both in analog mode or emulating DPAD.Support for this controller is not available on all cores, it is being introduced little by little. Consult each core's Readme for specific support. You can use any SNAC PSX adapter you already have or this one sold through the Analogizer online store: PSX SNAC + Cable

DB15:

Native NeoGeo controllers and arcade controllers with up to 6 action buttons following DB15 connection scheme.

SNAC DB15 AV SNAC DB15 UM

NES:

Native controller for the NES console.

SNAC NES AV

SNES:

Native controller of the SNES console.

SNAC NES AV

I have created this document where I will add the devices tested by users and their degree of compatibility: https://docs.google.com/spreadsheets/d/10iuDrmut3mm6FIIGvGas8eOBX_8D-Txi52ibHLDFC5w/edit?usp=sharing

PCENGINE 2btn:

Native two-button controller for the TurboGrafx/PCEngine console (requires a specific harness for use with the Analogizer).

PCENGINE 6btn:

Native six-button controller for the TurboGrafx/PCEngine console (requires a specific harness for use with the Analogizer).

PCENGINE Multitap:

5-port multitap adapter. Only supports 2-button controls (requires a specific harness for use with the Analogizer).

SNAC PCENGINE AV

I also recommend this type of SNAC adapter from Ultimate MiSTer which is very compact and allows you to connect two game controllers (except for PCEngine/TurboGrafx16 controllers where only a single controller or the MultiTap adapter can be connected):

https://ultimatemister.com/product/ultimate-snac-mini-hdmi/