'Access is denied' errors in log when performing Full Install #3
Description
Using release_20180523
Card is the 8gb one that came with the DE10 kit.
System: Windows 10 running under bootcamp on a Macbook Pro 2014.
Tried to run the installer's full install. Trying both normally and running as administrator both result in 'Access is denied' errors. See below for full output:
ErrorCode: 0x80004005, Message: 'Access is denied'
ErrorCode: 0x80004005, Message: 'The parameter is incorrect'
ErrorCode: 0x80004005, Message: 'Access is denied'
Starting to copy files\linux\uboot.img image to partition with offset 15420352
File size: 518167
Aligned size: 518656
1 iterations will be done with buffer size 1048576
1 / 1 (buffered ops) - 518167 / 518656
OK
Format error:
CheckPartialUpdateCompatible()...
Reading MBR from disk \\.\PHYSICALDRIVE1
Read successful 512 bytes
ErrorCode: 0x80004005, Message: 'Access is denied'
Card has new MiSTer layout. Partial update can be applied
done
CheckPartialUpdateCompatible()...
Reading MBR from disk \\.\PHYSICALDRIVE1
Read successful 512 bytes
ErrorCode: 0x80004005, Message: 'Access is denied'
Card has new MiSTer layout. Partial update can be applied
done