[BUG] Kuando Omega not staying on

[lezmaka]

Software Versions:

• Operating System: Synology NAS (Linux kernel 4.4.302+)
• Python version: 3.13.5
• BusyLight version: 0.45.1

General Type of Problem

• other

Describe the Problem
When using the CLI with a Kuando Omega with just busylight on the light turns off after a little over 7 seconds, then turns back on a couple seconds later. Same thing happens when I do the equivalent using the web API. It doesn't happen when I run busylight rainbow or busylight fli where the light is updated constantly. With that and the overall pattern repeating every 10 seconds, my initial thought was the keepalive needs to be sent more frequently. I tried lowering the keepalive interval but it just made the on/off pattern repeat more quickly.

Expected Behavior
The light stays on continuously until the process exits

Error Output
None

[JnyJny]

Thanks for the detailed bug report. I can recreate the bug and it looks like I didn't do a good enough job reviewing the new intern's code. I'll get a chance to look at it in depth in the next couple of days.

[JnyJny]

I've finally had a chance to debug this problem, which actually originates in the busylight-core package. I'm working on a fix for this and hope to release an update shortly.

[JnyJny]

I just published version 0.45.2 with the fixed busylight-core and tested the published version:

uvx --from busylight-for-humans busylight -a on

All the lights (including the Kuandos) in my test rig stayed on until the busylight process was terminated with a control-C.

[stfnwbr]

Update to 0.45.2 solves the problem for me. Thank you so much.

[JnyJny]

Thank you very much for the feedback!

[JnyJny]

I'm going to close this issue, however please re-open if this problem comes back.