How to remove gopro labs from Hero 13?

[Dingo72]

I would like to remove gopro labs from my hero 13, but I don’t know how!?

[dnewman-gpsw]

Same way you installed it, install the stock firmware on the camera. However, there should be no reason to do so, for any reason would be a bug report, and we want to hear all of those. Why do you want to remove Labs?

[dnewman-gpsw]

Tried what feature? What isn't working? Labs works the same as stock firmware if you don't enable its extensions, nothing should be needed to be removed. Have you enabled a feature you don't know how to disable?

[Dingo72]

I tought I could get 2.7k 60fps

[dnewman-gpsw]

Okay I can understand that confusion. Labs commands support all camera since HERO7, so there are command for resolutions and framerate combinations that don't exist on all models. Labs doesn't add video modes beyond the base camera. For HERO13, 2.7k 60fps not an offered mode, as you get better results shooting 4k or 5k, and scaling down in the edit. If you want stock firmware, just down load that and install from https://gopro.com/en/us/support/hero13-black-product-update/windows Or just leave Labs on the camera, and it will behave the same. If you don't want the Beta message scan this:

Or just set your owner information (which replaces the beta message), so if you loose your camera, there is a better chance of its return. use: https://gopro.github.io/labs/control/owner/

[Dingo72]

Thank you for your info. I tried to go back on factory firmware that way but it does not work. I downloaded it form gopro site and put it on sd card. Tahn i insert card in to the camera and nothing happened.

[dnewman-gpsw]

The instructions are the same as Labs, if you were successful with the first install, you can do the second. Match folder naming and placement extractly. But I repeat, they is no value in doing this.