Fix address for an access point

[mweissen]

Is there a way to permanently select the AP to which the Tasmota device should be registered (via the IP address or the MAC address)? Background: I have a mesh network with ASUS routers that all work on the same frequency and the same SSID, but of course have different IP addresses. The ESP32 keeps switching back and forth looking for the best signal strength and is unreachable for a few seconds. “SetOption57 1” did not help.
ESPHome apparently allows the IP address of the router to be set.

Translated with DeepL.com (free version)

[sfromis]

There is no way of selecting which BSSID or channel you want to use (and IP address is not relevant to mesh AP connections). However, if you turn off SetOption57, it will not rescan at intervals, and at boot only if you have SetOption56 on.