misc: fix compiler warnings

Fix various compiler warnings about unused parameters, signed-unsigned
comparisons and enum/int mismatches.

Signed-off-by: Luca Burelli <[email protected]>

Author: pillo79

examples/Peripheral/CallbackLED/CallbackLED.ino

@@ -82,6 +82,10 @@ void blePeripheralDisconnectHandler(BLEDevice central) {
 }
 
 void switchCharacteristicWritten(BLEDevice central, BLECharacteristic characteristic) {
+  // unused parameters
+  (void)central;
+  (void)characteristic;
+
   // central wrote new value to characteristic, update LED
   Serial.print("Characteristic event, written: ");
 

examples/Peripheral/EncryptedBatteryMonitor/EncryptedBatteryMonitor.ino

@@ -18,9 +18,10 @@
 #include <ArduinoBLE.h>
 
 
-#define PAIR_BUTTON 3        // button for pairing
+#define PAIR_BUTTON 3         // button for pairing
 #define PAIR_LED 24           // LED used to signal pairing
 #define PAIR_LED_ON LOW       // Blue LED on Nano BLE has inverted logic
+#define PAIR_LED_OFF HIGH     // ... so these are inverted as well
 #define PAIR_INTERVAL 30000   // interval for pairing after button press in ms
 
 #define CTRL_LED LED_BUILTIN
@@ -65,7 +66,7 @@ void setup() {
   });
 
   // Callback to allow accepting or rejecting pairing
-  BLE.setBinaryConfirmPairing([&acceptOrReject](){
+  BLE.setBinaryConfirmPairing([](){
     Serial.print("Should we confirm pairing? ");
     delay(5000);
     if(acceptOrReject){
@@ -218,9 +219,10 @@ void loop() {
     BLE.setPairable(false);
     Serial.println("No longer accepting pairing");
   }
-  // Make LED blink while pairing is allowed
-  digitalWrite(PAIR_LED, (BLE.pairable() ? (millis()%400)<200 : BLE.paired()) ? PAIR_LED_ON : !PAIR_LED_ON);
 
+  // Make LED blink while pairing is allowed, steady ON when paired
+  bool led_status = BLE.pairable() ? (millis()%400)<200 : BLE.paired();
+  digitalWrite(PAIR_LED, led_status ? PAIR_LED_ON : PAIR_LED_OFF);
 
   // if a central is connected to the peripheral:
   if (central && central.connected()) {
@@ -261,4 +263,4 @@ void updateBatteryLevel() {
     batteryLevelChar.writeValue(batteryLevel);  // and update the battery level characteristic
     oldBatteryLevel = batteryLevel;           // save the level for next comparison
   }
-}
+}

src/utility/HCIVirtualTransportZephyr.cpp

@@ -91,7 +91,7 @@ static int cyw4343_download_firmware(const struct device *uart) {
   }
 
   // Load the firmware image.
-  for (size_t offset=0; offset < brcm_patch_ram_length;) {
+  for (int offset=0; offset < brcm_patch_ram_length;) {
     uint8_t  length = brcm_patchram_buf[offset + 2];
     uint16_t opcode = (brcm_patchram_buf[offset + 0]) |
                       (brcm_patchram_buf[offset + 1] << 8);